对于颜值的高要求，首先这里安装的时候参考了https://www.github.com/Airblader/i3

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
cd /path/where/you/want/the/repository

# clone the repository
git clone https://www.github.com/Airblader/i3 i3-gaps
cd i3-gaps

# compile & install
autoreconf --force --install
rm -rf build/
mkdir -p build && cd build/

# Disabling sanitizers is important for release versions!
# The prefix and sysconfdir are, obviously, dependent on the distribution.
../configure --prefix=/usr --sysconfdir=/etc --disable-sanitizers
make
sudo make install

我使用linux mint安装的过程中出现了确实依赖包的情况
所以我又参考了这篇文章https://hackmd.io/s/By6mF5Rqb#
先安装依赖

1
sudo apt install libxcb1-dev libxcb-keysyms1-dev libpango1.0-dev libxcb-util0-dev libxcb-icccm4-dev libyajl-dev libstartup-notification0-dev libxcb-randr0-dev libev-dev libxcb-cursor-dev libxcb-xinerama0-dev libxcb-xkb-dev libxkbcommon-dev libxkbcommon-x11-dev autoconf xutils-dev libtool

编译的过程中还可能出现

1
2
Can't exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 326.
autoreconf: failed to run aclocal: No such file or directory

这里使用
sudo apt-get install automake来修复该问题

还可能出现

1
No package 'xcb-xrm' found

这里使用
sudo apt-get install libxcb-xrm-dev来修复该问题，详细参考了：https://unix.stackexchange.com/questions/338628/no-package-xcb-xrm-found

最后的i3配置如下

最后基本成型的配置

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
#
# Should you change your keyboard layout some time, delete
# this file and re-run i3-config-wizard(1).
#

# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!

set $mod Mod1

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:monospace 8

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8

# Before i3 v4.8, we used to recommend this one as the default:
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, its unicode glyph coverage is limited, the old
# X core fonts rendering does not support right-to-left and this being a bitmap
# font, it doesn’t scale on retina/hidpi displays.

# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod

# start a terminal
bindsym $mod+Return exec i3-sensible-terminal

# kill focused window
bindsym $mod+Shift+q kill

# start dmenu (a program launcher)
bindsym $mod+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop

# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right

# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right

# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right

# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right

# split in horizontal orientation
bindsym $mod+h split h

# split in vertical orientation
bindsym $mod+v split v

# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split

# toggle tiling / floating
bindsym $mod+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle

# focus the parent container
bindsym $mod+a focus parent

# focus the child container
#bindsym $mod+d focus child

# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10

# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8 bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10

# reload the configuration file
bindsym $mod+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym j resize shrink width 10 px or 10 ppt
        bindsym k resize grow height 10 px or 10 ppt
        bindsym l resize shrink height 10 px or 10 ppt
        bindsym semicolon resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left resize shrink width 10 px or 10 ppt
        bindsym Down resize grow height 10 px or 10 ppt
        bindsym Up resize shrink height 10 px or 10 ppt
        bindsym Right resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

bindsym $mod+r mode "resize"

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
# ******************************************************
# 系统最早的头部状态
#bar {
#        status_command i3status
#        tray_output primary
#	position top
#}
#********************************************i3-gaps*********************************
for_window [class="^.*"] border pixel 5
gaps inner 8
gaps outer 6
set $mode_gaps Gaps: (o) outer, (i) inner
set $mode_gaps_outer Outer Gaps: +|-|0 (local), Shift + +|-|0 (global)
set $mode_gaps_inner Inner Gaps: +|-|0 (local), Shift + +|-|0 (global)
bindsym $mod+Shift+g mode "$mode_gaps"

mode "$mode_gaps" {
        bindsym o      mode "$mode_gaps_outer"
        bindsym i      mode "$mode_gaps_inner"
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

mode "$mode_gaps_inner" {
        bindsym plus  gaps inner current plus 5
        bindsym minus gaps inner current minus 5
        bindsym 0     gaps inner current set 0

        bindsym Shift+plus  gaps inner all plus 5
        bindsym Shift+minus gaps inner all minus 5
        bindsym Shift+0     gaps inner all set 0

        bindsym Return mode "default"
        bindsym Escape mode "default"
}
mode "$mode_gaps_outer" {
        bindsym plus  gaps outer current plus 5
        bindsym minus gaps outer current minus 5
        bindsym 0     gaps outer current set 0

        bindsym Shift+plus  gaps outer all plus 5
        bindsym Shift+minus gaps outer all minus 5
        bindsym Shift+0     gaps outer all set 0

        bindsym Return mode "default"
        bindsym Escape mode "default"
}

set $mode_power power
bindsym Mod1+Control+l mode "$mode_power"
mode "$mode_power" {
    bindsym l mode "default", exec --no-startup-id /home/itgoyo/.config/i3/i3exit lock
    bindsym e mode "default", exec --no-startup-id /home/itgoyo/.config/i3/i3exit logout
    bindsym s mode "default", exec --no-startup-id /home/itgoyo/.config/i3/i3exit suspend
    bindsym h mode "default", exec --no-startup-id /home/itgoyo/.config/i3/i3exit hibernate
    bindsym r mode "default", exec --no-startup-id /home/itgoyo/.config/i3/i3exit reboot
    bindsym p mode "default", exec --no-startup-id /home/itgoyo/.config/i3/i3exit shutdown

    bindsym Return mode "default"
    bindsym Escape mode "default"
}


# Set Xresources colors:
set_from_resource $darkblack	color0  #000000
set_from_resource $black	color8  #000000
set_from_resource $darkred	color1  #000000
set_from_resource $red		color9  #000000
set_from_resource $darkgreen	color2  #000000
set_from_resource $green	color10 #000000
set_from_resource $darkyellow	color3  #000000
set_from_resource $yellow	color11 #000000
set_from_resource $darkblue	color4  #000000
set_from_resource $blue		color12 #000000
set_from_resource $darkmagenta	color5  #000000
set_from_resource $magenta	color13 #000000
set_from_resource $darkcyan	color6  #000000
set_from_resource $cyan		color14 #000000
set_from_resource $darkwhite	color7  #000000
set_from_resource $white	color15 #000000
set $transparent		#00000000

#
#                      #BORDER          BACKGROUND      TEXT            INDICATOR   CHILD_BORDER
#client.focused          $red            $red            $magenta        $darkmagenta            $darkblue
#client.unfocused        $transparent    $blue           $white          $darkblue               $darkblack
#client.focused_inactive $transparent    $blue           $white          $darkblue               $darkblack
#client.urgent           $darkred        $darkred        $black          $darkred                $darkred
#client.background $black


set $background #10101000
set $foreground #ffffff
set $gray       #d0d0d0
set $primary    #F58E8E
set $secondary  #79D4D5
set $tertiary   #7AABD4
set $additional #26CE8D
set $warning    #E7176A



# colors                BORDER      BACKGROUND TEXT        INDICATOR
client.focused          $primary    $primary   $foreground $primary
client.focused_inactive $secondary  $secondary $foreground $secondary
client.unfocused        $tertiary   $tertiary  $background $tertiary
#client.urgent           $gray       $gray      $foreground $gray
client.urgent           $darkred        $darkred        $black          $darkred                $darkred



bar {


	font pango:mono 10
	colors {
			background $darkblack
			statusline $darkwhite
			separator $cyan
			focused_workspace  $blue $darkblue $darkblack
        		active_workspace   $blue $blue $darkwhite
      			inactive_workspace $darkblack $darkblack $white
        		urgent_workspace   $darkblack $darkblack $white
		}
	status_command i3blocks
	position top
	mode dock
	modifier None
}


bar {
  i3bar_command i3bar -t
    height 28
    #禁止systemtray
    tray_output none
    # i3bar调用
    status_command ~/.config/i3/jconky
    # 显示位置top/bottom
    position top
    # 是否隐藏
  #  mode hide
    # 拆解工作区名（隐藏前面的1:2:3:……）
    strip_workspace_numbers yes
    # 定义分隔符∥
    separator_symbol "    "


}


bindsym $mod+Shift+Escape       exec --no-startup-id prompt "Exit i3?" "i3-msg exit"

# bindsym $mod+BackSpace
bindsym $mod+Shift+BackSpace    exec --no-startup-id prompt "Reboot computer?" "$reboot"

# compton
# auto start commands
exec --no-startup-id fcitx -r
exec --no-startup-id fcitx-qimpanel
exec --no-startup-id compton -b
#Background
exec --no-startup-id feh --bg-fill /home/itgoyo/cgi_lib.jpg



发现更多更好玩的，欢迎关注我的微信公众号: FullStacker